Free Shipping Over $59.99!
Audio-Technica ATM350GL Condenser Microphone (Factory Re-Certified)
$90.00 $299.99
Designed for use with guitars, the ATM350GL UniMount® mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument. When teamed with the included AT8491G guitar mount and strong, flexible AT8490L 9″” gooseneck, the mic can be securely fastened to a guitar or other stringed instrument with a body depth of 90-135 mm.
The microphone’s cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case.
- Low-profile mic design for minimum visibility
- Crisp, clear, well-balanced microphone response, even at high SPLs
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- UniMount® guitar mount with thumbscrew-adjustable clamp attaches securely to guitars and other stringed instruments with body depths of 90-135 mm, and provides excellent shock resistance for the microphone
- Rugged UniMount® 9″” gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
- In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
- Interchangeable elements available for hypercardioid and omnidirectional polar patterns
- Included violin mount with hook-and-loop fastener provides an additional mounting option
| Element | Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern | Cardioid |
| Frequency Response | 40 – 20,000 Hz |
| Low Frequency Roll-Off | 80 Hz, 12 dB/octave |
| Open Circuit Sensitivity | –49 dB (3.5 mV) re 1V at 1 Pa |
| Impedance | 200 ohms |
| Maximum Input Sound Level | 159 dB SPL, 1 kHz at 1% T.H.D. |
| Dynamic Range (Typical) | 130 dB, 1 kHz at Max SPL |
| Signal-To-Noise Ratio | 65 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements | 11– 52V DC, 3.5 mA typical |
| Switch | Flat, roll-off |
| Output Connector (Power Module) | Integral 3-pin XLRM-type |
| Cable | 4.0 m (13.1”) long (permanently attached to microphone), 3.2 mm (0.13″”) diameter, 2-conductor shielded cable with HIROSE HR10-type connector |
| Optional Interchangeable Elements | UE-H hypercardioid (100°) and UE-O omnidirectional (360°) |
| Audio-Technica Case Style | M36 |
(1) ATM350a Cardioid Condenser Microphone
(1) AT8543 Power Module
(1) AT8491G UniMount® Guitar Mount
(1) AT8490L UniMount® 9″” Gooseneck
(1) AT8468 Violin Mount (Hook-and-Loop Fastener)
(1) Protective Carrying Case
(1) AT8543 Power Module
(1) AT8491G UniMount® Guitar Mount
(1) AT8490L UniMount® 9″” Gooseneck
(1) AT8468 Violin Mount (Hook-and-Loop Fastener)
(1) Protective Carrying Case
0.0 Average Rating Rated (0 Reviews)