Revel G35/350Z/G37/370Z/Q50/Q60 VLS 52mm 10.0:1-20.0:1 AFR Digital OLED Wideband Air/Fuel Ratio Gauge

The Revel VLS Wideband A/F Ratio gauge utilizes the best in sensor technology with the included BOSCH LSU 4.9 oxygen content and Lambda value sensor. While many aftermarketgauges are still operating on the older, less accurate sensor, OE manufacturers and Revel VLS have made the switch to LSU 4.9, the new standard. Compatible with gasoline and E85.

BOSCH 4.9

Included with the Revel VLS Wideband A/F Ratio gauge is the BOSCH 4.9 LSU Sensor for the most accurate wideband O2 readings. This sensor is longer lasting, is accurate to 0.1 AFR reading, and does not require to be free-air calibrated upon initial setup* (however, it will still need further recalibration based on altitude changes and general sensor wear in order to ensure accuracy). This is a major improvement over the previous LSU 4.2 sensor.

This AF ratio gauge kit also includes the weld-in bung that is required for the installation of the sensor.

The kit also includes the weld-in bung that is required for the installation of the sensor.

All Revel VLS gauges include the necessary hardware, sensor, controller, and universal mounting pod and hood, as well as the installation instructions:

• (1) Wideband Air/Fuel Ratio Gauge 52mm (2 1/16 in.)
• (1) Power Harness
• (1) Electronic Control Unit
• (1) Gauge Signal Harness (Control Unit to Gauge)
• (1) Analog Output Harness
• (1) Oxygen Sensor and wiring
• (1) Weld-In Oxygen Sensor Bung
• (1) Bung Plug
• (1) Mounting Pod
• (1) Sun Shade (hood)
• (1) 3M double sided tape
• (2) Mounting Bracket Threaded Extension
• (2) Washers
• (2) Nuts
• (1) Mounting Bracket