The Revel VLS Water Temperature gauge monitors temperatures starting from 100 ºF all the way up to 300 ºF. The OLED screen allows for easy readings from any viewing angle, and a 30 LED outer ring for viewing at a quick glance. This kit is included with the water temperature sensor in 1/8 NPT thread pitch for easy installation.
The Revel VLS Water Temperature gauge is daisy-chain compatible with the VLS Boost gauge, VLS Oil Temperature gauge, VLS Oil Pressure gauge, and VLS Voltage gauge.
Revel VLS gauges have been designed to connect in sequence, minimizing wiring to keep your install clean. Once the first gauge is connected, adding another is as easy as plugging in the provided harness to the original gauge and routing it to the additional gauge – no need to connect each gauge individually to power.
*VLS gauges are daisy chain compatible only with VLS OLED gauges.
*Note: VLS Wideband A/F gauge and VLS Intercooler Dual Temp gauge are not daisy-chain compatible units.
All Revel VLS gauges include the necessary hardware, sensors, and universal mounting pod and hood, as well as the installation instructions:
- (1) Water Temperature Gauge 52mm (2 1/16 in.)
- (1) Power Harness
- (1) Water temperature sensor and wiring harness
- (1) Mounting Pod
- (1) Sun Shade (hood)
- (1) 3M double sided tape
- (2) Mounting Bracket Threaded Extension
- (2) Washers
- (2) Nuts
- (1) Mounting Bracket


0.0 Average Rating Rated (0 Reviews)