LEA 4 Channel Smart Amplifier with Dante

• Web Browser-based UI works on any device with no software to download
• Direct LoZ and HiZ (70V or 100V) selectable per channe
• Proprietary Smart Power Bridge double the output power of any single channel without sacrificing other channels on the amplifier
• 3 Ways to Connect to the amplifier 1.) Built in WiFi Access Point t 2.) Connects to existing WiFi network 3.) Local Area Network Ethernet connection
• 3rd Party API support for most of the industry leading system processors on the market
• 96kHz Analog Devices DSP with Input Routing, multiple 48dB/Oct crossover filters, 8 Parametric EQ filters, user configurable speaker limiters, and real time load monitoring
• Universal Switch Mode Power Supply with PFC. Operation from 100VAC – 240VAC +/-10%
• Analog fully routable inputs with backup capabilities
• External I/O Port for Remote On/Off and fault monitoring
• Highly Efficient Class D Output Stage for low AC Current draw

84D

Output Power	4 x 80 WRMS @ 4Ω, 8Ω, 70V, 100V (40W at 2Ω, 80W at 25V)
Inputs	Analog: 4 Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity, Dante: 8 x 8 Dante at 96kHz or 48kHz, Multicast or Unicast, AES 67: Configurable via the Dante Controller Software.
Product Weight	12.25 lb
Dimensions	14.25″” x 19″” x 1.75″”
Cooling	Front to Rear Variable Fan Speed Cooling
Power Supply	Universal Switch Mode Power Supply
AC Mains	100VAC – 240VAC +/- 15% 50Hz or 60Hz
External I/O	External I/O In: Toggles Remote On/Off External I/O Out: Indicates Amplifier Health
User Interface	Web Browser User Interface, 3rd Party API control, or CLOUD control
DSP Architecture	Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
THD+N	0.1% (20Hz to 20kHz)
Frequency Response	20Hz to 20kHz, +/- 0.5 dB @ 4?, 8?, 70V, 100V, -2.5dB @ 20kHz at 2?
Signal-to-Noise Ratio	105dB (20Hz to 20kHz referenced to 8?)
Crossover Frequency	70dB (20Hz to 20kHz)
Amplifier Output Classification	Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel

164D

Output Power	4 x 160 WRMS @ 4Ω, 8Ω, 70V, 100V (80W at 2Ω, 160W at 25V)
Inputs	Analog: 4 Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity, Dante: 8 x 8 Dante at 96kHz or 48kHz, Multicast or Unicast, AES 67: Configurable via the Dante Controller Software.
Product Weight	12.25 lb
Dimensions	14.25″” x 19″” x 1.75″”
Cooling	Front to Rear Variable Fan Speed Cooling
Power Supply	Universal Switch Mode Power Supply
AC Mains	100VAC – 240VAC +/- 15% 50Hz or 60Hz
External I/O	External I/O In: Toggles Remote On/Off External I/O Out: Indicates Amplifier Health
User Interface	Web Browser User Interface, 3rd Party API control, or CLOUD control
DSP Architecture	Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
THD+N	0.1% (20Hz to 20kHz)
Frequency Response	20Hz to 20kHz, +/- 0.5 dB @ 4?, 8?, 70V, 100V, -2.5dB @ 20kHz at 2?
Signal-to-Noise Ratio	105dB (20Hz to 20kHz referenced to 8?)
Crossover Frequency	70dB (20Hz to 20kHz)
Amplifier Output Classification	Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel

354D

Output Power	4 x 350 WRMS @ 4Ω, 8Ω, 70V, 100V (175W at 2Ω, 230W at 25V)
Inputs	Analog: 4 Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity, Dante: 8 x 8 Dante at 96kHz or 48kHz, Multicast or Unicast, AES 67: Configurable via the Dante Controller Software.
Product Weight	14 lb
Dimensions	14.25″” x 19″” x 1.75″”
Cooling	Front to Rear Variable Fan Speed Cooling
Power Supply	Universal Switch Mode Power Supply
AC Mains	100VAC – 240VAC +/- 15% 50Hz or 60Hz
External I/O	External I/O In: Toggles Remote On/Off External I/O Out: Indicates Amplifier Health
User Interface	Web Browser User Interface, 3rd Party API control, or CLOUD control
DSP Architecture	Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
THD+N	0.1% (20Hz to 20kHz)
Frequency Response	20Hz to 20kHz, +/- 0.5 dB @ 4?, 8?, 70V, 100V, -2.5dB @ 20kHz at 2?
Signal-to-Noise Ratio	105dB (20Hz to 20kHz referenced to 8?)
Crossover Frequency	70dB (20Hz to 20kHz)
Amplifier Output Classification	Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel

704D

Output Power	4 x 700 WRMS @ 4Ω, 8Ω, 70V, 100V (350W at 2Ω, 330W at 25V)
Inputs	Analog: 4 Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity, Dante: 8 x 8 Dante at 96kHz or 48kHz, Multicast or Unicast, AES 67: Configurable via the Dante Controller Software.
Product Weight	14 lb
Dimensions	14.25″” x 19″” x 1.75″”
Cooling	Front to Rear Variable Fan Speed Cooling
Power Supply	Universal Switch Mode Power Supply
AC Mains	100VAC – 240VAC +/- 15% 50Hz or 60Hz
External I/O	External I/O In: Toggles Remote On/Off External I/O Out: Indicates Amplifier Health
User Interface	Web Browser User Interface, 3rd Party API control, or CLOUD control
DSP Architecture	Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
THD+N	0.1% (20Hz to 20kHz)
Frequency Response	20Hz to 20kHz, +/- 0.5 dB @ 4?, 8?, 70V, 100V, -2.5dB @ 20kHz at 2?
Signal-to-Noise Ratio	105dB (20Hz to 20kHz referenced to 8?)
Crossover Frequency	70dB (20Hz to 20kHz)
Amplifier Output Classification	Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel

(1)LEA 4 Channel Smart Amplifier with Dante
(1) IEC Power Cord
(1) Quick Start Guide
(1) Record of Excellence
(1) Welcome Card
(1) Sticker
(2) (2) Removable/Washable front panel Foam Filters
(5) 3 position 5.08mm Amphenol Anytek Input Connector / (4) for analog input, (1) for External I/O Port
(4) 2 position 5.08mm Amphenol Anytek Output Connectors