Free Shipping Over $59.99!
Audio-Technica AT8035 Condenser Microphone (Factory Re-Certified)
$69.00 $229.99
The length (14.53″”) of the AT8035 Line + Gradient Condenser Microphone is well-suited for ENG, outdoor recording and other specialized uses. The microphone is designed for video production and broadcast (ENG/EFP) audio acquisition. Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off. It operates on battery or phantom power.
- Designed for video production and broadcast (ENG/EFP) audio acquisition
- Length is well-suited for ENG, outdoor recording and other specialized uses
- Provides the narrow acceptance angle desirable for long-distance sound pickup
- Excellent sound rejection from the sides and rear of mic
- Switchable low-frequency roll-off
- Operates on battery or phantom power
- RoHS compliant—free from all substances specified in the EU directive on hazardous substances
| ELEMENT | Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN | Line + gradient |
| FREQUENCY RESPONSE | 40-20,000 Hz |
| LOW FREQUENCY ROLL-OFF | 80 Hz, 12 dB/octave |
| OPEN CIRCUIT SENSITIVITY | Phantom: –38 dB (12.5 mV) re 1V at 1 Pa |
| Battery | –39 dB (11.2 mV) re 1V at 1 Pa |
| IMPEDANCE Phantom | 250 ohms |
| Battery | 300 ohms |
| MAXIMUM INPUT SOUND LEVEL | Phantom: 132 dB SPL, 1 kHz at 1% T.H.D. |
| Battery | 120 dB SPL, 1 kHz at 1% T.H.D. |
| DYNAMIC RANGE (TYPICAL) | Phantom: 110 dB, 1 kHz at Max SPL |
| Battery | 98 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO | 72 dB, 1 kHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS | 11-52V DC, 2 mA typical |
| BATTERY TYPE | 1.5V AA/UM3 |
| BATTERY CURRENT / LIFE | 0.4 mA / 1200 hours typical (alkaline) |
| SWITCH | Flat, roll-off |
| WEIGHT | 170 g (6.0 oz) |
| DIMENSIONS | 369.0 mm (14.53″”) long, 21.0 mm (0.83″”) diameter |
| OUTPUT CONNECTOR | Integral 3-pin XLRM-type |
| ACCESSORIES FURNISHED | AT8405a stand clamp for 5/8″”-27 threaded stands; 5/8″”-27 to 3/8″”-16 threaded adapter; AT8132 windscreen; battery; protective carrying case |
| AUDIO-TECHNICA CASE STYLE | SG1 |
(1) AT8035 Shotgun Microphone
(1) AT8405a Stand Clamp
(1) Threaded Mic Clip Adapter
(1) AT8132 Windscreen
(1) SG1 Protective Carrying Case
(1) AT8405a Stand Clamp
(1) Threaded Mic Clip Adapter
(1) AT8132 Windscreen
(1) SG1 Protective Carrying Case
Related products
More Products-
VivaLift Ultra PLR4955 Hand Control Remote
$25.50$84.99 -
Jazzy Ultra Light Thumb Screw
$4.50$14.99 -
Replacement Seat for Jazzy Elite HD & 14 Electric Wheelchairs
$110.00$549.99
0.0 Average Rating Rated (0 Reviews)