LEA 8 Channel Smart Amplifier

• Web Browser-based UI works on any device with no software to download
• Direct LoZ and HiZ (70V or 100V) selectable per channe
• Proprietary Smart Power Bridge double the output power of any single channel without sacrificing other channels on the amplifier
• 3 Ways to Connect to the amplifier 1.) Built in WiFi Access Point t 2.) Connects to existing WiFi network 3.) Local Area Network Ethernet connection
• 3rd Party API support for most of the industry leading system processors on the market
• 96kHz Analog Devices DSP with Input Routing, multiple 48dB/Oct crossover filters, 8 Parametric EQ filters, user configurable speaker limiters, and real time load monitoring
• Universal Switch Mode Power Supply with PFC. Operation from 100VAC – 240VAC +/-10%
• Analog fully routable inputs with backup capabilities
• External I/O Port for Remote On/Off and fault monitoring
• Highly Efficient Class D Output Stage for low AC Current draw

88

Output Power	8 x 80 WRMS @ 4Ω, 8Ω, 70V, 100V (40W at 2Ω, 80W at 25V)
Inputs	Analog:Analog: Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity
Product Weight	13.55 lb
Dimensions	14.25″” x 19″” x 1.75″”
Cooling	Front to Rear Variable Fan Speed Cooling
Power Supply	Universal Switch Mode Power Supply with Power Factor Correction (No PFC in Connect Series 84D, Connect Series 164D, Connect Series 88D, & Connect Series 168D)
AC Mains	100VAC – 240VAC +/- 15% 50Hz or 60Hz
External I/O	External I/O In: Toggles Remote On/Off External I/O Out: Indicates Amplifier Health
User Interface	Web Browser User Interface, 3rd Party API control, or CLOUD control
DSP Architecture	Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
THD+N	0.1% (20Hz to 20kHz)
Frequency Response	+/- 0.5 dB @ 4?, 8?, 70V, 100V, -2.5dB @ 20kHz at 2?
Signal-to-Noise Ratio	105dB (20Hz to 20kHz referenced to 8?)
Crossover Frequency	70dB (20Hz to 20kHz)
Amplifier Output Classification	Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel

168

Output Power
Inputs	Analog:Analog: Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity
Product Weight	13.55 lb
Dimensions	14.25″” x 19″” x 1.75″”
Cooling	Front to Rear Variable Fan Speed Cooling
Power Supply	Universal Switch Mode Power Supply with Power Factor Correction (No PFC in Connect Series 84D, Connect Series 164D, Connect Series 88D, & Connect Series 168D)
AC Mains	100VAC – 240VAC +/- 15% 50Hz or 60Hz
External I/O	External I/O In: Toggles Remote On/Off External I/O Out: Indicates Amplifier Health
User Interface	Web Browser User Interface, 3rd Party API control, or CLOUD control
DSP Architecture	Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
THD+N	0.1% (20Hz to 20kHz)
Frequency Response	+/- 0.5 dB @ 4?, 8?, 70V, 100V, -2.5dB @ 20kHz at 2?
Signal-to-Noise Ratio	105dB (20Hz to 20kHz referenced to 8?)
Crossover Frequency	70dB (20Hz to 20kHz)
Amplifier Output Classification	Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel

(1)LEA 8 Channel Smart Amplifier
(1) IEC Power Cord
(1) Quick Start Guide
(1) Record of Excellence
(1) Welcome Card
(1) Sticker
(2) (2) Removable/Washable front panel Foam Filters
(9) 3 position 5.08mm Amphenol Anytek Input Connector / (8) for analog input, (1) for External I/O Port
(8) 2 position 5.08mm Amphenol Anytek Output Connectors -80W/160W