Features

Table

· 1.25’’ thick textured vinyl-covered non-resonant MDF
chassis

· 16’’ x 11’’footprint

· 19” x 14” x 6” overall size

· Aluminium Platter

· Platter rotates on an oil bath bearing and fitted to
shaft with a #2 Jacob’s Taper for a concentric rigidly
mounted coupling

· The bearing has a PEEK thrust disc and machined
graphite impregnated brass bushings using a
Thompson Engineering 60 Rockwell case hardened
shaft

Tonearm:

· New 9” vertical Yoke type tonearm with lateral
turntable type bearing

· Pivot to spindle: 223mm

· Effective length: 240.7mm

· Overhang: 17.7mm

· Offset angle: 22.85 degrees

· Average RMS distortion: .36%

· VTA adjustable arm mount.

· Damped stainless steel armtube.

· Very pure copper wire, twisted with special insulating
jacket

· The armbase is upgradeable to a standard JMW 9 arm

Specifications

Type: Belt drive (manual turntable)

Motor: 24 V synchronous AC motor

Turntable platter: Aluminum

Diameter: 11.81” (30.0 cm)

Turntable speeds: 33.3 RPM and 45 RPM

Cartridge: Audio Technica AT-VM95E

Output: 5 mV @ 1 KHz

Tracking force: 1.5 g (recommended)

Input load: 47 kOhm

Dimensions (WDH): 18.5” x 13.5” x 4.3”

Weight: 12.9 lb (5.9 kg)